You are on : Both ends simultaneous cutting CNC Lathe > FC-SB10 / SA12
CNC Lathe - Both ends simultaneous cutting CNC Lathe
Features
- Single central positioned spindle (fixed), with two turrets and twin CNC control system. Twin turret can operate simultaneously and carry out different cutting on each ends.
- Shaft, rod or tubes both ends cutting (O.D. or I.D.) are carried out simultaneously to obtain very high concentricity and efficiency.
- Special designed loading & unloading system can be fit to handle workpiece with variety lengths.
- Robot loading & unloading system can be fit to handle workpiece with unsymmetrical or special shaped on ends.
- Special spindle or other equipment can be ordered for special job requirements.
Specifications
| Model |
FC-SB10 |
| Spindle |
| No. of spindle |
Unit |
1 |
| Max. spindle |
rpm |
3000 |
4000 |
| Feedrate |
| X, Y, Z, axis rapid traverse |
M/min. |
12 |
| Stroke |
| X1 axis stroke |
mm |
100 |
| X2 axis stroke |
mm |
100 |
| Z1 axis stroke |
mm |
220 |
| Z2 axis stroke |
mm |
220 |
| Turret |
| No. of turret |
unit |
2 |
| Turret type |
servo |
V8-st. |
| O.D. tool shank |
 mm |
20 x 20 |
| I.D. tool shank (Max.) |
Ømm |
25 |
| Motors |
| Spindle motor |
KW |
7.5 |
| Servo motor, X axis |
KW |
1 KW |
| Servo motor, Z axis |
KW |
1 KW |
| Hydraulic pump |
HP |
2 HP |
| Lubrication pump |
w |
12 W |
| Coolant pump |
KW |
0.375 |
| Machine size |
| Length |
mm |
3000 |
| Width |
mm |
1920 |
| Height |
mm |
2000 |
| N.W/G.W. |
kgs |
5000 |
| Gross weight |
kgs |
5500 |
Specifications are subject to change without further notice.
Standard
- Full guard
- Coolant system
- Heat exchanger
- Lub. system
- Swivel operator panel
- Tools for set up
- Pneumatic / Hyd. system
- Tower light
- Work light
- Chip conveyor
|
Option
- Chuck
- Extension chuck sleeve
- Collet
- Robot load / unload system
- Oil mist collector
- Tailstocks
- Power milling
- FANUC, PC BASED
- The speed of spindle increase
|
|
